Furnish your home sustainably with reclaimed furniture finds. From dining tables and dressers to chairs, sofas, and unique vintage pieces, our rotating selection offers budget-friendly, character-rich alternatives to buying new.
Furniture
Rebuilding Exchange Evanston Round table with a metal base
$50.00
-
Rebuilding Exchange Evanston MultiGeneration by Knoll Counter Height Stool
MultiGeneration by Knoll Stools support multiple postures and stools have a flexible shell and a sled-based design with a footrest to allow for shifting positions. Counter height (27")
$50.00
-
Rebuilding Exchange Evanston Emeco Counter Stool – Designed by Phillip Starck 24” Height - 6 Available
Genuine Emeco aluminum bar stool, designed by Philippe Starck and handcrafted in the USA. Counter height (24") Brushed aluminum finish Lightweight (6.5lbs each) yet incredibly strong. Emeco's heat-treatment makes these aluminum chairs tougher than steel. Non-corrosive, fire-resistant, and sustainably made Iconic design commissioned by MoMA Made in the USA Emeco uses 80% recycled aluminum content when handcrafting their chairs. Of the recycled aluminum, half is post consumer (soft drink cans) and half is post-industrial (manufacturing scrap).
$125.00
-
Rebuilding Exchange Chicago French Provincial Rustic Vanity
It could use a refinish! This is solid wood and has a lot of potential!
$200.00
-
Rebuilding Exchange Chicago Green Vintage Cabinet
Calling all restoration pros! Buy this charming green shabby chic cabinet. Leave as is, or refinish! 12" D x 45" H x 41" W
$100.00
-
Rebuilding Exchange Evanston Circular glass coffee table
The top is glass, the base is wood.
$60.00
-
Rebuilding Exchange Evanston Kitchen vanity cabinet
You could serve so many dinners on this, or a few second breakfast’s. Regardless, you’d make a hobbit happy by purchasing this.
$80.00
-
Rebuilding Exchange Evanston Round side table
$35.00
-
Rebuilding Exchange Chicago VINTAGE STEEL LYON MACHINE SHOP STOOL WITH SQUARE SEAT - 30" Height
These gray vintage lyon machine shop stools are well loved (from a former art space), colorful paint splatter included! All are a little bit different. Buy online or stop by our Chicago location to purchase! We have (3) total available at this height.
$50.00
-
Rebuilding Exchange Evanston Buffet
65wX78hX15d
$400.00
-
Rebuilding Exchange Evanston School Desks
Takes me back . . .
$15.00
-
Rebuilding Exchange Evanston Patio table set
Perfect for afternoon tea with the Queen.
$30.00
-
Rebuilding Exchange Evanston Glass square table
26wX21h there is a chip on the bottom left corner
$25.00
-
Rebuilding Exchange Chicago Learnin’ Seat
Chair for learnin
$125.00
-
Rebuilding Exchange Evanston Catalpa and Copper Pipe Coffee Table
This piece is made by Paul Segedin of Urban Praire Design. Segedin is a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. Piece Details: Coffee table is built from copper pipe and sustainable, locally-sourced catalpa. Handmade in my shop in Evanston, the table features a copper pipe lower shelf.
$425.00$340.00
-
Rebuilding Exchange Evanston White Oak and Copper Pipe Side Table
This piece is made by Paul Segedin of Urban Praire Design. Segedin is a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. Piece Details: Small side table (12" high x 12-1/2: wide X 9" deep) is made from sustainable and locally harvested (near Chicago) white oak and from half-inch commercial-grade copper pipe.
$115.00$92.00
-
Rebuilding Exchange Evanston Coconino Coffee Table
This piece is made by Paul Segedin of Urban Praire Design. Segedin is a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. Piece Details: This red oak and copper pipe coffee table uses locally-sourced (Horigan Lumber) and sustainable red oak plus construction-grade half-inch copper pipe. The copper pipe lower shelf measures approximately 36" x 14". "Coconino" refers to one of the geological foundations at the Grand Canyon, my favorite place on the planet.
$375.00$300.00
-
Rebuilding Exchange Evanston Kona-Stained Poplar and Copper Pipe Cube Table
This piece is made by Paul Segedin of Urban Praire Design. Segedin is a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. Piece Details: The end table is made from kona-stained baltic birch plywood and from industrial-grade three-quarter-inch copper pipe. Table measures 18" tall by 18" wide x 18" deep.
$185.00$148.00
-
Rebuilding Exchange Evanston Redwood/Pine/Cherry and Copper Pipe Side Table
This piece is made by Paul Segedin of Urban Praire Design. Segedin is a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. Piece Details: Stool is made from reclaimed redwood, pine, and cherry and from three-quarter inch copper pipe.
$175.00$140.00
-
Rebuilding Exchange Evanston 2x4 and Copper Pipe Bench/End Table
This piece is made by Paul Segedin of Urban Praire Design. Segedin is a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. Piece Details: Bench/end table is made from new, premium kona-stained 2x4s and from construction-grade three-quarter-inch copper pipe. This piece is part of my effort to construct quality furniture from "modest" materials that can be found in typical lumberyards and hardware stores.
$185.00$148.00
-
Rebuilding Exchange Evanston Plywood and Copper Pipe Cube Table
This piece is made by Paul Segedin of Urban Praire Design. Segedin is a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. Piece Details: Handmade and unique, this copper pipe and poplar end table measures approximately 25" wide x 25 "deep x 21" high.
$375.00$300.00
-
Rebuilding Exchange Evanston Diamond Deco Cherry and Copper Pipe End Table
This piece is made by Paul Segedin of Urban Praire Design. Segedin is a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. Piece Details: Unique end table is made from cherry and half-inch construction-grade copper pipe. Table features 196 lead-free soldered copper joints and a distinctive lower shelf. This table is sure to be a conversation starter in your home for years to come!
$475.00$380.00
-
Rebuilding Exchange Evanston Ash and Copper Pipe End Table
This piece is made by Paul Segedin of Urban Praire Design. Segedin is a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. Piece Details: Minimalist and modern, this 24" high x 23" wide x 16" deep end table is made from locally harvested (from Horigan Lumber) one-and-a-half-inch thick ash and from three-quarter inch construction-grade copper pipe.
$370.00$296.00
-
Rebuilding Exchange Chicago Hole-in-One Oak and Copper Pipe Table
This piece is made by Paul Segedin, a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website.
$250.00$200.00
-
Rebuilding Exchange Chicago Repurposed Breuer Chairs with Reclaimed, Old-Growth 2x4s
This piece is made by Paul Segedin, a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. Piece Details: chrome-framed Breuer Chairs, refinished with old growth, reclaimed 2 x 4s from Rebuilding Exchange in Chicago. Two available if you fall in love with the pair!
$250.00$200.00
-
Rebuilding Exchange Chicago Reclaimed 2x4 and Copper Pipe Plant Stand
This piece is made by Paul Segedin, a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. Piece Details: Plant stand/table made from reclaimed old-growth (possibly Douglas Fir) 2x4s and from half-inch commercial grade copper pipe. Table includes a small, lower copper pipe shelf.
$120.00$96.00
-
Rebuilding Exchange Chicago Mid-Century-ish Plywood and Copper Pipe Table/Stand
This piece is made by Paul Segedin, a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. Piece Details: Mid-century modern-ish display table/plant stand is made from kona-stained premium birch plywood and from three-quarter inch commercial-grade copper pipe. Table featured angled copper pipe legs and a small lower copper pipe shelf.
$225.00$180.00
-
Rebuilding Exchange Chicago Reclaimed 2x4 and Copper Pipe Waterfall Table
This piece is made by Paul Segedin, a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. Piece Details: My take on the classic waterfall table is made from reclaimed, old growth (100+ year-old) 2x4s (from Rebuilding Exchange in Chicago) and from commercial grade copper pipe. The 2x4s used in the table are probably Douglas Fir. This piece functions as a bench as well as end table.
$425.00$340.00
-
Rebuilding Exchange Chicago Reclaimed 2x4 Table Bench
This piece is made by Paul Segedin, a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. This custom-built coffee table is made from reclaimed, old growth 2x4s (from Rebuilding Exchange in Chicago, Illinois) and L-grade copper pipe.
$650.00$520.00
-
Rebuilding Exchange Chicago Cherry and Copper Pipe End Table with Cherry Shelf
This piece is made by Paul Segedin, a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. Piece Details: Made from 3/4" thick cherry and half-inch copper pipe, this end table is unique, elegant, and highly functional. Lower cherry shelf measures 13" x 13". Joints are soldered for extra strength and an industrial-modern look.
$300.00$240.00
-
Rebuilding Exchange Chicago Office Desk
Width: 60in Depth: 23 3/4in Height: 29 1/2in (can be slightly adjusted)
$25.00
-
Rebuilding Exchange Evanston Wooden display cabinet
Beautiful display cabinet, perfect for Nana’s finest China or your personal collection of Knick-knacks. Top comes off for easier transport, includes glass shelves.
$300.00
-
Rebuilding Exchange Chicago The “You’re insurance won’t cover that” Waiting Room Chairs
That familiar synthetic upholstery that gives you those vibes like— have I met my deductible this year??? Bring these feelings to your space with these simple wooden chairs
$30.00
-
Rebuilding Exchange Evanston 19th Century French Renaissance Revival Carved Oak Sideboard with Mirror
Step back in time and add unparalleled grandeur to your home with this exceptional French Renaissance Revival sideboard. Every detail, from the regal lion's heads and enigmatic Green Man carvings to the turned legs and intricate foliate motifs, showcases the opulence of late 19th century French design. The mirrored hutch, featuring three original panels and charming figural carvings of musicians, perfectly complements the substantial lower buffet with its ample storage in four cabinets and four drawers. The mirrored hutch is removable. This piece does show sign of wear on the top and is also missing a piece of its back panel (see pictures included) DIMENSIONS: 82.5"w x 24.5"d x 114"h x
$6,000.00$2,500.00
-
Rebuilding Exchange Evanston OFS Gathr Modular Lounge - Seven Seats with Back Panels and Countertop Table
Dimensions of each seat - Molded plywood Overall width: 29.5"w Overall depth: 41.75"d Height: 48" Table is 43.5" Assembly is super simple! It is as easy as sliding the pieces together. Side panels slide easily into already attached set screws. Not all seats include gaskets. Back Panels with Colonnades are detachable https://ofs.com/products/seating/modular-lounge/gathr
$12,500.00$3,400.00
-
Rebuilding Exchange Chicago OFS Gathr Modular Lounge - Four Seats with Back Panels with Colonnades
Dimensions of each seat - Molded plywood Overall width: 29.5"w Overall depth: 41.75"d Height: 76.25"h 1 1/2" steel tube colonnades attach directly to the back panel. Spaced 3 1/2" apart, on center Assembly is super simple! It is as easy as sliding the pieces together. Side panels slide easily into already attached set screws. Original hardware to affix back panel to seats not included. Not all seats include gaskets. Back Panels with Colonnades are detachable https://ofs.com/products/seating/modular-lounge/gathr
$8,000.00$2,000.00
-
Patrick's Special Chair
It's special
$125.00
-
Rebuilding Exchange Chicago Vintage Hutch
$250.00
-
Rebuilding Exchange Chicago Vintage Desk
Missing a drawer pull.
$30.00
-
Rebuilding Exchange Chicago Entertainment Cabinet
Height: 69in Width: 34 7/8in Depth: 21in
$180.00
-
Rebuilding Exchange Chicago Vintage Mid-19th Century Canopy Bed
Handmade in Pennsylvania including hand-forged hardware. Slight warping on one of the supports. Hand stiched canopy ca. 1980 Length 84”, Width 42”, Height 80”
$900.00
-
Rebuilding Exchange Chicago Antique Heirloom Weiman Table
Wood coffee or side table with glass top. The top of the table has a crinkle effect. Solid table in good vintage condition. Some chips at glass edge, etc. please refer to photos.
$100.00
-
Rebuilding Exchange Chicago 6 Drawer Dresser
$175.00
-
Rebuilding Exchange Chicago Mid Century Hutch Cabinet
$300.00
-
Rebuilding Exchange Chicago 40in x 84in Marble Top Table w/ Stone Legs
Originally $10,000!
$500.00
-
Rebuilding Exchange Chicago Room and Board Maria Lee Media Console
Great condition media cabinet with sliding doors. 48" wide, 20" deep, 29" tall.
$250.00
-
Corner Hutch
Rebuilding Exchange invests in our communities by reusing building materials, reducing construction waste, and training, supporting, and connecting people seeking careers in the building trades.
$25.00
-
Dining Room Chair
Rebuilding Exchange invests in our communities by reusing building materials, reducing construction waste, and training, supporting, and connecting people seeking careers in the building trades.
$20.00
