Consciously Crafted Chicago - Featured Maker

This piece is made by Paul Segedin of Urban Praire Design. Segedin is a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. Piece Details: Coffee table is built from copper pipe and sustainable, locally-sourced catalpa. Handmade in my shop in Evanston, the table features a copper pipe lower shelf.

Read more less

This piece is made by Paul Segedin of Urban Praire Design. Segedin is a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. Piece Details: Small side table (12" high x 12-1/2: wide X 9" deep) is made from sustainable and locally harvested (near Chicago) white oak and from half-inch commercial-grade copper pipe. 

Read more less

This piece is made by Paul Segedin of Urban Praire Design. Segedin is a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. Piece Details: This red oak and copper pipe coffee table uses locally-sourced (Horigan Lumber) and sustainable red oak plus construction-grade half-inch copper pipe. The copper pipe lower shelf measures approximately 36" x 14". "Coconino" refers to one of the geological foundations at the Grand Canyon, my favorite place on the planet.

Read more less

This piece is made by Paul Segedin of Urban Praire Design. Segedin is a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. Piece Details: This reclaimed lumber and copper wine rack is ready to be your showcase piece to home your favorite wines.

Read more less

This piece is made by Paul Segedin of Urban Praire Design. Segedin is a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. Piece Details: The end table is made from kona-stained baltic birch plywood and from industrial-grade three-quarter-inch copper pipe. Table measures 18" tall by 18" wide x 18" deep.

Read more less

This piece is made by Paul Segedin of Urban Praire Design. Segedin is a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. Piece Details: Stool is made from reclaimed redwood, pine, and cherry and from three-quarter inch copper pipe.

Read more less

This piece is made by Paul Segedin of Urban Praire Design. Segedin is a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. Piece Details: Bench/end table is made from new, premium kona-stained 2x4s and from construction-grade three-quarter-inch copper pipe. This piece is part of my effort to construct quality furniture from "modest" materials that can be found in typical lumberyards and hardware stores.

Read more less

This piece is made by Paul Segedin of Urban Praire Design. Segedin is a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. Piece Details: Handmade and unique, this copper pipe and poplar end table measures approximately 25" wide x 25 "deep x 21" high.

Read more less

This piece is made by Paul Segedin of Urban Praire Design. Segedin is a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. Piece Details: Unique end table is made from cherry and half-inch construction-grade copper pipe. Table features 196 lead-free soldered copper joints and a distinctive lower shelf. This table is sure to be a conversation starter in your home for years to come!

Read more less

This piece is made by Paul Segedin of Urban Praire Design. Segedin is a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. Piece Details: Minimalist and modern, this 24" high x 23" wide x 16" deep end table is made from locally harvested (from Horigan Lumber) one-and-a-half-inch thick ash and from three-quarter inch construction-grade copper pipe.

Read more less

This piece is made by Paul Segedin, a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website.

Read more less

These cheeseboards are made by Paul Segedin of Urban Prarie Design, a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website.

Read more less

These cheeseboards are made by Paul Segedin, a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. There are three styles available:1. Cherry stain, curved copper handles2. Natural stain, curved copper handles3. Natural stain, T-copper handles

Read more less

This piece is made by Paul Segedin, a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website.

Read more less

This piece is made by Paul Segedin, a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. Piece Details: These are 6-bottle wine racks made from reclaimed lumber and copper. We have three available at the Chicago Rebuilding Exchange.

Read more less

This piece is made by Paul Segedin, a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. Piece Details: Sculpture made from reclaimed spindles (from Rebuilding Exchange), leftover steel rods, and end grain plywood. Inspired by sculptor/designer Harry Bertoia's "Sonambient" sculptures.

Read more less

This piece is made by Paul Segedin, a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. Piece Details: Modernist sculpture made from scrap red and white oak and copper pipe

Read more less

This piece is made by maker Paul Segedin, owner and creative behind Urban Prairie Design, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. Piece Details: Modernist sculpture made from scrap red oak and copper pipe

Read more less

This piece is made by Paul Segedin, a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. Piece Details: Modernist sculpture made from scrap red and white oak and copper pipe

Read more less

This piece is made by Paul Segedin, a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. Piece Details: Plant stand/table made from reclaimed old-growth (possibly Douglas Fir) 2x4s and from half-inch commercial grade copper pipe. Table includes a small, lower copper pipe shelf.

Read more less

This piece is made by Paul Segedin, a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. Piece Details: Mid-century modern-ish display table/plant stand is made from kona-stained premium birch plywood and from three-quarter inch commercial-grade copper pipe. Table featured angled copper pipe legs and a small lower copper pipe shelf.

Read more less

This piece is made by Paul Segedin, a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. Piece Details: My take on the classic waterfall table is made from reclaimed, old growth (100+ year-old) 2x4s (from Rebuilding Exchange in Chicago) and from commercial grade copper pipe. The 2x4s used in the table are probably Douglas Fir. This piece functions as a bench as well as end table.

Read more less

This piece is made by Paul Segedin, a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. This custom-built coffee table is made from reclaimed, old growth 2x4s (from Rebuilding Exchange in Chicago, Illinois) and L-grade copper pipe. 

Read more less

This piece is made by Paul Segedin, a local woodworker, and our current featured maker! Segedin's work will be on show in-store, at both locations, now through the end of September. Segedin has graciously partnered with us to show, share and sell his work. This is a commission-based partnership, and we are grateful to collaborate with him and share his work with you. You can see more of Paul's work on his website. Piece Details: Made from 3/4" thick cherry and half-inch copper pipe, this end table is unique, elegant, and highly functional. Lower cherry shelf measures 13" x 13". Joints are soldered for extra strength and an industrial-modern look. 

Read more less